CADConcept render

Drag the divider: CAD on the left, the finished marker on the right.

Machined golf ball markers

Aim true.

Set the Sikte behind your ball to mark its spot, then lift the ball. Turn the spinner until its white line points the way you choose. Replace your ball with its own line meeting the Sikte’s, pick up the marker, and you are ready to putt.

1 · Size

Sikte 32Compact · 32 mm
Anodized base, stainless spinner · about 16 g

Sikte 41Classic · 41 mm
Anodized base, stainless spinner · about 23 g

2 · Finish

3 · Engraving (optional)

Type your line for the underside 12 characters left. Letters, numbers, spaces and . & ' - ! only. The picture updates as you type.

Or try one:

Total

—

Not on sale yet. These are launch prices. Tell us which one you would pick and we will email you at launch. Orders of 25 or more: see Teams & gifts.

Sikte · SIK-teh · Norwegian for aim

Accuracy achieved on the putting green

Sikte makes ball markers machined from solid metal, with a spinner you turn by hand and a groove you can find by touch. The mark is a ring split by a single line: the groove, seen from above.

The spinner

Turn it. It stays where you leave it.

The top is a separate piece that turns inside the base. It moves with a light push and stays where you leave it. Try it: drag the disc, or use the slider.

Set it, set your ball down, and pick the marker up before you putt.

28°

Made like a small instrument

Four details you can feel.

Reeded edge

Fine teeth around the spinner, like the edge of a coin, give your fingertip something to turn.

A groove, not a print

The line is cut edge to edge and filled white, so it is visible and you can find it by touch.

Held by a magnet

A magnet is set into the base. It clips to a magnetic hat clip and lifts with a pickup tool.

Machined, then engraved

Turned and milled from solid metal. The underside takes a laser-engraved line of your choosing.

Our story

More than a decade in the making.

I first tried to make this marker more than ten years ago, with a welder's help.

That first try was a start. The idea never changed: a spinner you can feel, set in a base that holds it still. What changed was how it gets made, until it could be drawn in CAD, cut from solid metal and finished like a good watch case.

ThenA welded prototype
The first attempt, built with a welder's help. It proved the idea was worth chasing.
In betweenYears of drawing
Sketches, models and small fixes, each one closer to what I had in mind.
NowMachined from solid metal
Every Sikte part is drawn in CAD and cut from solid stock, not cast and not stamped.

How it is made

Made from solid metal, finished by hand.

Sikte is designed and machined for one purpose. Nothing is cast, stamped or bought off a shelf and rebadged.

The spinner

Stainless steel

Dense and hard, so the spinner has real weight and holds its edge. It wipes clean and stays that way.

The base

Anodized aluminum

Takes a deep, even color, which is why both sizes come in six finishes named for the course.

The feel

Set by hand

Each marker is assembled and checked by hand so it turns the way it should.

Two sizes

Pick the one that fits your pocket.

	Sikte 32 · Compact	Sikte 41 · Classic
Launch price
Width	32 mm (1 1/4 in)	41 mm (1 5/8 in)
Material	Anodized aluminum base, stainless steel spinner	Anodized aluminum base, stainless steel spinner
Weight	about 16 g	about 23 g
Finishes	From the Tips Black, Gunmetal, Greenside Green, Forward Tee Red, Blue Tees Blue, Caddie White	From the Tips Black, Gunmetal, Greenside Green, Forward Tee Red, Blue Tees Blue, Caddie White
Spinner finish	Natural stainless; coated on From the Tips Black and Gunmetal	Natural stainless; coated on From the Tips Black and Gunmetal
Rim text	AIM TRUE	AIM TRUE
Fits Sikte Treff Tool kit	Yes	Not yet

Make it yours, simply

One line on the underside.

Initials, a name, a course, a date. Up to 12 characters, laser engraved around the Sikte mark. No artwork to upload and no proofs to approve, so it ships fast.

Need a logo or a full run for a club, team or company? That is a quote, below.

Preview shows your text from the engraving field above.

Underside preview

Coming later

Your design on the spinner.

These flag and guitar spinners are future designs, shown as concept renders. We will also accept your own design. Tell us what you have in mind in the quote form below.

Concept render of a Sikte 32 with a US flag spinner, and its underside in a hand — US flag. Future design.

Concept render of a Sikte 32 with a Canadian flag spinner, and its underside in a hand — Canadian flag. Future design.

Concept render of a Sikte 32 with a Norwegian flag spinner, and its underside in a hand — Norwegian flag. Future design.

Concept render of a Sikte 32 with a guitar on the spinner, and its underside in a hand — Guitar. Future design, or send us your own.

Teams, clubs, companies, groomsman gifts

Orders of 25 or more.

Logos, crests and flags are available for sets of 25 or more, from team and company orders to groomsman gifts with names or initials. Tell us what you have in mind and we will reply with options and a price.

Artwork is by quote only, so the shop stays simple: two sizes, six finishes, one engraving line.

Coming next

Sikte Treff Tool.

The Sikte Treff Tool is a card-size golf repair tool.

It has a dock that holds your Sikte 32, a spare marker, and a slide-out fork that locks open.

Questions

Before you order.

When can I buy one?

Sikte is pre-launch. First builds are being made now. Join the launch list below and we will email you when orders open.

Where does the name come from?

Sikte (SIK-teh) is the Norwegian word for aim. It also means a sight, as in the sight on a rifle.

Can I use it in competition?

Ball-marker size limits in the Equipment Rules are under 1 inch tall and under 2 inches across. Sikte is well inside both limits, at 32 or 41 mm across. Always check your local rules and committee before you play a tournament round.

Is the groove painted?

The groove is cut into the spinner and filled white. It stays a groove, so you can feel it.

Will it work with my hat clip?

Each marker has a magnet in the base. It holds to magnetic hat clips and pickup tools. Hold strength depends on the clip.

Is the magnet safe?

It is a small neodymium magnet, sealed in the base. Keep it away from small children, pacemakers and other medical implants, and from cards, phones and other electronics. See magnet safety.

How does engraving work?

One line, up to 12 characters, laser engraved on the underside. We do not engrave artwork on single orders. For logos, use the quote form for orders of 25 or more.

Launch list

Be first to aim true.

First access to Sikte 32 and Sikte 41, plus news on the Sikte Treff Tool. A few emails, no spam.